Solder paste mixer
Precautions
After the production runs, to open the top cover of the machine, you must wait until the machine has completely stopped before opening:
The solder paste can or the weight on the two fixtures on the left and right sides, the weight difference can not exceed 100 Gram. Otherwise, it will cause the machine to shake when it is stirred at high speed. Please try to avoid;
Technical parameter:
Dimension | 400x400x420mm |
Weight | About 35KG |
Operating Voltage | AC 220V 50Hz 60Hz >60W |
Operating speed | Motor 1350 RPM revolution: 1000RPM Rotation: 500PRM |
Working capacity | 500 g. Syringe, red plastic tube, etc. the fixture can be customized. |
Stir two cans of solder paste at the same time | 500g |
Stiring time | 1-99 minute digitally adjustable |
Operation method | Light touch button for easy operation |
Fixture function | Universal fixture for all kinds of brand solder paste cans |
Running noise | Low running noise <20dB |
Supplementary notes:
1. The maximum stirring time can be set as 9.9 minutes and the minimum as 0.1 minutes.If the working time reaches the set time, the motor will stop rotating, the display time will change to 0.0, and the buzzer will beep for 6 seconds.The time after that displays the time value that was last set.
2: when the motor is working, if the upper cover is opened, the system will protect it, the motor will stop rotating, the display time will change to 0.0, and the buzzer will beep for 6 seconds.The time after that displays the time value that was last set.
3: when the motor is working, if the STOP button is pressed, the motor will STOP rotating, the display time will change to 0.0, and the buzzer will beep for 6 seconds.The time after that displays the time value that was last set.
Our Company
ETON
Every day, people all over the globe develop new ideas – ideas that can improve our lives and our world.
Helping to turn these ideas into real products is what we do and what drives us. To accomplish this, we are constantly advancing the limits of feasibility and efficiency by developing innovative solutions for the complete electronics production chain and the SMT placement process . ETON is dedicated to making quality products that help our clients operate more efficiently and effectively. ETON is guided by the principles of fairness to our suppliers, associates, clients and employees, and helping them achieve to the best of their potential.
Corporate Objectives
To maintain customer satisfaction through timely delivery of reliable products and servicesTo maintain an efficient and quality driven work environment with an emphasis on constant Research and Development to provide technologically superior products To attract and retain quality personnel through an equitable reward system, constant training and upgrading of skills as well as career enhancement opportunities
Matters needing attention:
1. Do not put the machine in a humid or high temperature place, and keep the surface clean.
2: take care of the machine. The working place of the machine should be smooth and clean.
3: when filling tin paste cans, the staff should lock the lock to prevent the occurrence of outside.
4. Do not place anything too heavy on the top of the machine to prevent the protection switch from being crushed.
5. The solder paste can only be taken out after the motor stops completely to prevent the operator from being hurt.
6: sealed bearing, without constant lubrication and maintenance.
FQA:
Q1: What about the shipping methods?
A1:Our mode of transportation is by sea, air and road.
Q2:What’s your delivery time?
A2:Usually 30 days after deposit, if we have inventory, the time can be brought forward.
Q3:How can you make sure we will receive the machine with high quality?
A3: Our team will inspect each batch of machine before delivery, we have certificates of CE,Quality management certificate.
