ET-1200 Semi-automatic stencil printer
Semi-automatic stencil printer is used in electronics production lines.
1. with a safe design, the wrong operation of the action can not be started, the red emergency stop platen, automatically rise to return to the operation, to ensure the operator's personal safety, reduce scrap rate.
2. The lifting drive adopts the precision linear guide lifting, and is equipped with a pneumatic locking device and an anti-drip device to reduce the printing time and improve the printing quality.
3. pneumatic version of the device, so that the speed and height of the plate can be adjusted.
Stencil frame size:
470*370 mm-1300*550 mm
PCB plate thickness:
Front/back+/-10mm right/left+/-10 mm
1. Cleaning and storage of steel mesh Every time the steel mesh is used, the surface, side surface and steel mesh hole of the steel mesh should be carefully cleaned. In particular, the steel mesh hole needs to be cleaned with a toothbrush to prevent the solder paste from being clogged and affecting the tin.
2. The use of solder paste The use of solder paste should strictly follow the guidelines for the use of solder paste, only one-third of the bottle can be placed on the steel network at a time. Stirring was resumed after 4 hours of printing. Solder paste bottles should be scraped clean to prevent waste.
We are a new manufacturer of patch technology equipment established in 2011.
We established a research and development center before the establishment of the company to carry out LED special placement machine technology and patent research and development. In 2008, we established Hong Kong Hongyitong Group Co., Ltd.
In 2009, the first group group ET-12.ET-51 series began to sell, and obtained 4 inventions and utility model patents.