0.6 M Conveyor
Points for attention
1. adjust the machine to level before use.
2. check whether the power is in line with the specifications of the conveyor before starting the machine
3. if the power supply is unstable, a power regulator must be installed.
4. the machine must be safely grounded, and the ground wire must be well fixed in the fuselage part.
5. in order to ensure the normal operation of the machine, do not download or change the controller and touch screen program.
6. if the machine is not used for a long time, the power should be cut off.
7. Do not install machinery in dusty, greasy, conductive powder, corrosive gas, combustible gas, humid,
8. impact shock, high temperature and outdoor environmen
Steel frame structure, rail length
Width adjustment range
7MM flat belt conveyor
Adjustable from 0.5 to 9 m/min
Set of stepper motor
Industrial control panel
Single(left→right or right→left)
One section of control, two Sensors
Set of electric control box
A..Transport belt not moving: check if the belt is jammed or too loose.
B. Belt drop: check whether the belt pulley rotates flexibly and whether the screws are tightened.
C. The transmission motor does not work:
1. Check whether the power is normal and whether the indicator light is on.
2. Whether it is in test test state, if so, please test test switch or touch the left photoelectric switch.