0.6 m double rail conveyor
Connectors are used to connect SMT production lines, and can also be used for PCB buffering, inspection, testing or manual insertion of electronic components.
Points for attention
1. Adjust the machine to horizontal state before use
2. Check whether the power supply conforms to the specification of the transmitter before starting
3. If the power supply is unstable, a power regulator must be installed.
4. The machine must be safely grounded, and the ground wire must be properly fixed in the fuselage.
5. In order to ensure the normal operation of the machine, do not download or change the controller and touch screen program.
6. If the machine is not in use for a long time, the power should be cut off.
7. Do not install the machine in dirt, oil dirt, conductive powder, corrosive gases, inflammable gases, moisture, etc.
8. Shock and vibration, high temperature and outdoor environment.
Steel frame structure, rail length
Width adjustment range
7MM flat belt conveyor
Adjustable from 0.5 to 9 m/min
Set of stepper motor
Industrial control panel
Single(left→right or right→left)
One section of control, two Sensors
Set of electric control box
ShenZhen ETON Automation Equipment Co.,LTD. Main research and development to be produce sale in integral whole automation equipment manufacturers, the main products: SMT solder paste printer, solder paste mixer, SMT feeder, automatic machine, fully automatic machine, automatic suction machine, fully automatic dual track plate, seal parallel transfer machine, high-speed placement machine, can be targeted research and development with SMT production of various kinds of main equipment of non-standard customized production, make production line more intelligent, humane, high-quality, high rty modern intelligent production.To save manpower and improve production efficiency. Your trust is our biggest power.