HT-E8D machine is Dual system,dual module multifunctional mounter with high capacity of 80000CPH. It can mount capacitors,resistors,LED3014/3020/3528/5050,IC and shaped components. It applies to power driver,electric board,lens,linear bulb,household appliance and etc.
Ø X、Y、Z drive way is high-end magnetic linear motor+servo motor.
Ø Install 4 camera and adopt vision for the flight identification, mark correction.
Ø PCB clamping is electric clamping+adjustable pressure pneumatic.
Ø Vision for the flight identification ,mark correction.
Ø Electronic feeder feeding system.
Ø Non-stop material re-loading function.
Ø Auto-optimization after coordinates generated.
2. technical parameter
² Saline shaft from korea
² Mark camera from HK vision
² Grating scale from Renishaw,UK
² Guideway from IKO Japan
² Pneumatic components from SMC Japan
² Sensor from Beckhoff Germany
² Drag chain from IGUS Germany
Accepted delivery terms
EXW, FOB, CIF , CFR
Accepted payment currency
Accepted payment type
5.Packing & shipping
Waterproof material and wooden case
Delivery within 30 days after receipt of payment..
Transshipment and partial shipment according to the contract
Since the establishment of the company, we have participated in many trade exhibitions at home and abroad, including Guangzhou Guangya exhibition, Turkey lighting exhibition, India lighting exhibition, Pakistan exhibition, India nepcon exhibition, Thailand exhibition, etc.We add a large number of foreign clients every year.
In November 2011, Shenzhen ETON automation equipment co., ltd. was established in Shenzhen, China. It is a national high-tech enterprise dedicated to the research and development, production, sales and after-sales technical service of SMT high-speed SMT mounter.
ETON’ s purpose: to create value for customers,creating benefits for society.
ETON vision: determined to become the world’s most competitive manufacturer and service provider of pick and place machine and high-end electronic testing equipment.
Quality principle: quality first, client-oriented, continuous improvement!
Management policy: sincere business,focus on R&D,manufacturing intentions, considerate service,customer trust.
8.Knowledge of mounter industry
l PCB printed circuit board, also known as printed circuit board, is an important electronic component, is the support of electronic components, is the carrier of electrical connection of electronic components. Almost every kind of electronic device has electronic components such as integrated circuits, so as to make the electrical interconnection between the components, it is suitable for printing. The printed circuit board has the dual function of conducting circuit and insulating floor.
l Classification: according to the number of circuit board layers can be divided into single panel, double panel, four-layer board, six-layer board and other multi-layer circuit board.
(1) Single panel: On the most basic PCB, the parts are concentrated on one side and the wires on the other side. because the wire only appears on one side.
(2) Double panel: This circuit board has wiring on both sides, but to use the wire on both sides, it is necessary to have a proper circuit connection between the two sides. A "bridge" between these circuits is called a guide hole (via). A guide hole is a small hole filled or coated with metal on a PCB, which can be connected to a wire on both sides.
(3) Multi-layer board: In order to increase the area that can be wired, the multilayer board uses more single or double-sided wiring boards. A printed circuit board with one double-sided inner layer, two single-sided outer layer or two double-sided printed circuit boards with two single-sided printed circuit boards with one side as inner layer and two single-sided printed circuit boards with one side as outer layer.
l Advantages: simplify the assembly and welding of electronic products, reduce the connection workload under the traditional mode, greatly reduce the labor strength of workers; reduce the volume of the whole machine, reduce the cost of products, improve the quality and reliability of electronic equipment; adopt standardized design, which is conducive to mechanization and automation in the production process; the whole assembly and commissioning PCB can be used as an independent spare part to facilitate the exchange and maintenance of the whole machine products.
Selection of Surface Mounting Components
selection and design of surface mounted components is a key part of the overall design of the product. the designer determines the electrical properties and functions of the components in the system structure and detailed circuit design stage. the packaging form and structure of surface assembled components should be determined in the SMT design stage according to the specific conditions of the equipment and process and the overall design requirements. solder joints installed on the surface are both mechanical and electrical connection points, and reasonable selection has a decisive effect on improving PCB design density, productivity, testability and reliability.
There is no difference in function between surface mounted components and plug-in components, the difference lies in the packaging of components. Choose the appropriate package, the main advantages are :1). effectively saving PCB area ;2). provide better electrical properties ;3). protect the interior of the components from environmental effects such as moisture ;4). provide good communication links ;5). help dissipate heat and facilitate transmission and testing.