Multifunctional Mounter Group Take Cent Stick, Cent Take Cent Stick

Single module multifunctional chip mounter,LED making machinery;multifunctional mounter for power drive/electric board/lens/linear bulb/household appliance
Chat Now

Product Details

1. Product details

image

HT-E8S machine is single module multifunctional mounter with high capacity of 40000CPH. It can mount capacitors,resistors,LED3014/3020/3528/5050,IC and shaped components. It applies to power driver,electric board,lens,linear bulb,household appliance and etc.

 

Ø XYZ drive way is high-end magnetic linear motor+servo motor.

Ø Install 2 camera and adopt vision for the flight identification, mark correction.

Ø PCB clamping is electric clamping+adjustable pressure pneumatic.

Ø Vision for the flight identification ,mark correction.

Ø Electronic feeder feeding system.

Ø Non-stop material re-loading function.

Ø Auto-optimization after coordinates generated.

pick and place machine ht-e8s technical parameter

image

2.pick and place machine ht-e8s product features

Ø XYZ drive way is high-end magnetic linear motor+servo motor.

Ø Install 2 camera and adopt vision for the flight identification, mark correction.

Ø PCB clamping is electric clamping+adjustable pressure pneumatic.

Ø Vision for the flight identification ,mark correction.

Ø Electronic feeder feeding system.

Ø Non-stop material re-loading function.

3. pick and place machine ht-e8s product parts

HT-E8S 部件图

4. pick and place machine packing & shipping

Packing details: vacuum packing and wooden case

Shipping:  Shenzhen port within 30 days after payment

Port:  Shenzhen

Lead time:

Quantity (units)

Est. Time (days)

1-2

>

30

To be negotiated

image

5.Company profile

image


6. FAQ

1) Do you have oversea after sale service?

We have set up an overseas office in India.We can offer technical support abroad. If you have any technical problem, our engineers will support you promptly.

2)How is the training?

You can send your engineers to our workshop to study, or we can send our engineers to your workshop for guidance. We guarantee that the training will not be completed until your operators are fully trained.

3)   It’s hard to use the machine?

No, not at all. Touch screen display, English operation interface. Generally training about five days can be skilled in the operation of the machine.

4)   Does your machines have quality certificates?

We are high-tech enterprise with CE,SIRA,CCC .

5)How about the warranty?

We guarantee it for one year free of charge. Software updates are free for life.

7.Knowledge of mounter industry

 Adaptability of SMT placement machine

 Adaptability of the SMT placement machine refers to the following two major elements

Type of components that can be attached

 The mounting machines with a wide range of mounting components have better adaptability than those with only SMC or a few SMD types. The main factors affecting the type of mounting components of the patch machine are the precision of the mount, the mounting tool, the compatibility between the centering mechanism and the components, and the number and type of feeder that the patch can accommodate. Some patch machines can only hold limited feeders, while some patch machines can hold most or all types of feeders, and the number of feeders that can be accommodated is also relatively large, obviously the latter is more adaptable than the former. Capacity of the feeder on the placement machine is usually expressed by the maximum number of 8 mm braided feeder that can be mounted on the placement machine.

 Adjustment of SMT placement machine

 When the SMT placement machine is converted from assembling one type of PCB to assembling another type of PCB, the re-programming of the placement machine, the replacement of the feeder, the adjustment of the PCB transmission mechanism and the positioning table, and the adjustment / replacement of the SMT patch head should be carried out.

 1 Programming the placement machine. Two programming methods, manual instruction programming and computer programming, are commonly used in placement machines. Low-grade placement machines often use manual teaching programming, higher-grade placement machines are computer programming;

 2 Replacement of feeder. (a) In order to reduce the time taken to replace the feeder, the most common method is to use the "quick release" feeder, and the faster method is to replace the feeder rack so that the feeder of the components on each PCB type is mounted on a separate feeder rack for replacement;

 ③PCB transfer mechanism and positioning table adjustment. When the PCB size of the replacement is different from the PCB size of the current mount, adjust the width of the PCB positioning table and the conveyor PCB. Automatic placement machine can be automatically adjusted under the control of the program, lower-grade placement machine can be manually adjusted;

 4 Adjustment and replacement of patch head. When the type of components to be pasted on the PCB exceeds the mount range of a patch head, or when the PCB type is replaced, the patch head is often replaced or adjusted. Most of the patch function under the control of the program automatic replacement / adjustment process, while low-grade placement machine with manual replacement and adjustment operation;

 SMT factors affecting the adaptability of the placement machine: SMT the movement range of the placement machine transmission system and the mounting head, the number and type of feeder installed by the placement machine, the programming ability, and the change time of the placement machine.



Hot Tags: multifunctional mounter group take cent stick, cent take cent stick, China, suppliers, manufacturers, factory, price

Inquiry

You Might Also Like