What is Pick and Place Machine?
Mounter: "Surface Mount System" (Surface Mount System)
In the production line, it is configured behind the dispenser or screen printer.
It is a device that accurately places surface mount components on the PCB pads
by moving the placement head. Divided into two kinds of manual and automatic.
Function of HT-E6T Pick and Place Machine
Is for led, Lens, capacitors, resistors, IC, Shaped components, etc.
Apply to Led lamp manufacturer, PCBA production line etc .
(1) If I use your pick and place machine, what kind of infrastructures I need to prepare?
Answer: Because pick and place machine is high accurate equipment, it has a
high requirement for the factory environment. First, most suitable temperature is
22-32 degrees. Second, to meet the basic need of production, air compressor should
be 7.5P or more. Third, try best to keep a non-dusty workshop. Fourth, in some area
the power supply not stable enough, so one UPS is needed.
(2) What are the basic safety operations?
Answer: First, when everyday first start the machine, keep the speed on 20% 10 minutes
for machine warmly. Second, Don’t directly open the cover when machine is doing
production! If you need to open it, please press stop button first. Third, if you want to
shut down the machine, please shut down the computer first, then turn off the rotary switch.
(3) How do I maintain this machine?
Answer: It's easy, at fixed period push few lube oil into the rail, and use non-dusty cloth
wipe the raster ruler.