0.6 M Conveyor
Features:
Detection bits are available for powder spraying on the surface of aluminum groove frame iron plate
Light fixtures and operation drawing indicator stand
Instrument board is convenient for manual placement with material preparation
Split into two sets of transmission, can stop two PCB boards (optional)
Technical parameter:
Steel frame structure, rail length | L=600 |
Width adjustment range | 50～390 |
Transmission height | 920±20 |
Transmission | 7MM flat belt conveyor |
Speed | Adjustable from 0.5 to 9 m/min |
Motor | Set of stepper motor |
Control | Industrial control panel |
Transmission Direction | Single(left→right or right→left) |
One section of control, two Sensors | |
Set of electric control box | |
Installation:
Horizontal position: all cup foot adjustments must be balanced and stressed simultaneously to avoid vibration during mechanical operation.
Power supply requirements: please check whether the input voltage meets the requirements, and the fixed power switch supply device with capacity above 200 watts must be equipped with leakage protection.If the power supply is unstable, a power regulator must be installed.
Machinery must be safely grounded.The ground wire must be properly secured to the fuselage.
Pre-sale Service
1. Reply your messages or emails within 12 hours.
2. OEM&ODM acceptable(Custom- made logo or package).
3. Professional solutions are provided.
4. New product recommendation.
After- sales Service
Within 12 months, if there will be any problem with the machine, we will allow the professional person to handle it for you or to the site.
