0.6 m double rail conveyor
|Steel frame structure, rail length||L=600|
|Width adjustment range||50~260|
|Transmission||7MM flat belt conveyor|
|Speed||Adjustable from 0.5 to 9 m/min|
|Motor||Set of stepper motor|
|Control||Industrial control panel|
|Transmission Direction||Single(left→right or right→left)|
|One section of control, two Sensors|
|Set of electric control box|
Connectors are used to connect SMT production lines, and can also be used for PCB buffering, inspection, testing or manual insertion of electronic components.
1. Ensure that there is no foreign matter in the transportation part, belt, belt wheel and guide rail, and ensure smooth and smooth transportation.
2. Regularly oil the transmission part and the rack or width adjusting screw rod, and the oil shall be executed in the stopped state.In case of power failure, please immediately turn off the main power switch of the equipment.
With good quality, competitive price, easy operation and energy saving, our products are very popular in domestic and oversea market. And all of our machines are wildly used in electronic circuit, photovoltaic, LED industry, instruments and apparatuses.
A..Transport belt not moving: check if the belt is jammed or too loose.
B. Belt drop: check whether the belt pulley rotates flexibly and whether the screws are tightened.
C. The transmission motor does not work:
1. Check whether the power is normal and whether the indicator light is on.
2. Whether it is in test test state, if so, please test test switch or touch the left photoelectric switch.
Check whether the conveyor belt is too loose and keep the conveyor belt clean.
Keep the width to adjust the cleaning of the optical axis and the screw rod.
Wipe the dirty oil with no silk or paper, then add lubricating oil to the optical axis and add lubricant to the screw.
Test all Through / test through / check knob functions.
Test whether the transmission of PCB is smooth.