Flexible Strip Led Making Machine

Flexible Strip Led Making Machine

Flexible strip led making machine The flexible LED strip is assembled with FPC and assembled with SMD LED, so that the thickness of the product is only one coin, which does not occupy space. The general specification is 30cm long, 18 LEDs, 24 LEDs and 50cm long. 15 LEDs, 24 LEDs, 30 LEDs, etc....

Product Details

Flexible strip led making machine

The flexible LED strip is assembled with FPC and assembled with SMD LED, so that the thickness of the product is only one coin, which does not occupy space. The general specification is 30cm long, 18 LEDs, 24 LEDs and 50cm long. 15 LEDs, 24 LEDs, 30 LEDs, etc. There are also 60cm, 80cm, etc., different users have different specifications. And can be cut at will, or can be arbitrarily extended and the illumination is not affected. The FPC material is soft and can be bent, folded and wound freely, and can be moved and stretched in three dimensions without breaking. It is suitable for use in irregular places and small spaces, and because it can be bent and wound arbitrarily, it is suitable for arbitrarily combining various patterns in advertising decoration.

 

The features of flexible strip:

1) Hard, can curl like a walkie-talkie.

2) Can be cut and extended.

3) The bulb and the passage are completely covered in the flexible plastic. The insulation and waterproof functions are good, and the insurance is used.

4) Strong weather resistance.

5) There is no easy break and long life.

6) It is easy to manufacture graphics, texts, etc.; it has been widely used in construction, bridges, pathways, gardens, courtyards, strata, lie boards, furniture, buses, lakes, underwater, posters, pink cards, signs, etc. Whitewashed and illuminated.

 

The mounter machine of flexible strip:

HT-T7 is pick and place machine professional for led flexible strip.

It can produce 250mm* any length flexible strip,

It is suitable for mounting led 3014/3020/3528/5050 and resistor, capacitors, bridge rectifiers.

It can produceing with 2-4 types of materials with high capacity, available for 5m, 50m or any length of flexible strip and roll to roll.

 

High configuration:

HT-T7 is very high configuration:

1.There are five sets of imported camera, support vision alignment, mark correction. And the precision is reach 0.02mm.

2.There are two modules,15 nozzles for each mounting part, part one and part two can be mounted separatly or synchronously.

3.It is calibration automatically, high precision, available for RGB.

4. It is operating system is windows 7, the software is R&D independently.

5.The capacity is reach 150000 chip per hour.

6.The electrical control and motion control card module is independent research and development by ETON.

7.The feeding way is electric feeder with double motor.

Free installation and training

We are highly value our service. If you buy our machine, we will sent our engineer to your factory to install and training in freely.

 

Fast delivery   

We will send the machine within 28 days after payment.

 

Contact us:

ETON automation equipment company

Contact:Joy

Wechat/whatsup/phone:+86-135-9015-1025

Tel:400-998-3211

Website:www.smtmountingmachine.com

Add: :44th.Building,5th.Cuigang Industrial Area, Fuyong, Baoan District, Shenzhen,China

 


Inquiry