ETON HT-t9 High Speed Two-arm Mounter Group Of Group Of Stick

1.Product details

Components of this high speed mounter can mount include  LED3014/3020/3528/5050 and resistor,capacitors,bridge rectifiers,etc. Application of this SMT mounter include 5m,50m or any length of flexible strip and roll to roll;RGB.Pick and place machine HT-T9 has 64 nozzles and 64 feeding stations.Max mounting height is 13mm.Mounting speed is 200000CPH. It can produce with 2～4 types of materials with high capacity at same time. The Single plate material can be mounted, and the same plate material is always mounted on the same lamp.It has dual-arm four modules with 16 nozzles for each mounting part, and part A/B/C/D can be mounted separately or synchronously.

2.led light making machine HT-T9 product parts

3. pick and place machine HT-T9  Packing & shipping

Packing details: vacuum packing and wooden case

Shipping:  Shenzhen port within 30 days after payment

Port:  Shenzhen

lead time:

4. pick and place machine business terms

5. Company profile

In November 2011, Shenzhen ETON automation equipment co., ltd. was established in shenzhen, China. It is a national high-tech enterprise dedicated to the research and development, production, sales and after-sales technical service of SMT high-speed SMT mounter.

 company information

6. Our Certifications

The company has independently developed a number of intellectual property technologies, including 9 invention patents, 112 practical patents and 12 software Copyrights.Successively obtained "shenzhen high-tech enterprise", "national high-tech enterprise", “shenzhen TOP brand”, “2015 LED technology innovation award” ,“industry special contribution award” ,“the 4th China LED first innovation award” ,“industry special contribution award”, “double soft enterprise”and so on.

7.Knowledge of mounter industry

Reflow welding process

l Reflow soldering refers to the use of solder paste (a mixture of solder and flux) to connect one or more electronic components to the contact pad, through the control of heating to melt the solder to achieve permanent bonding, can be used back welding furnace, infrared heating lamp or hot air gun and other different heating methods to weld.

l Flow curve of reflux welding process

preheating zone: PCB and material preheating, so that the welded material to achieve thermal equilibrium,

Constant temperature zone: remove the surface oxide, some airflow start to evaporate (start welding) temperature to reach the solder paste melting point (this time the solder paste is in the insoluble state), this is the reflux furnace is the 5673 heating interval heating action

Back soldering zone: from the melting point of solder to the peak and then down to the melting point, the process of solder melting, PAD to form welding with solder, this is aimed at the back soldering furnace is the heating effect of 893 heating intervals.

Cooling zone: from the solder dissolution point down to about 50 degrees, alloy solder joint formation process.

Furnace temperature needs to be smooth, smooth, so that the flow of complete evaporation.