ET-F400 Automatic stencil printer
SMT production line
In the automatic smt production line, loader machine send board to printer, then through the conveyor, pcb board sent to pick and place machine from printer, after mounting components, pcb board sent to reflow oven, once again bonding the reinforcing element to the pcb board. Lastely, unloader machine would collete the processed pcb board.
ET-F400 apply to smt production line, it is automatic, totally printing by machine.
ET-F400 max pcb size is 400*340 mm, min size is 50*50 mm, thickness is 0.4-6 mm, pcb warpage no more than one percent.
PCB support system is magnetic pin/up-down table adjust/supportblock. Clamping system is side clamping and vacuum nozzle.
ET-F400 max screen frames size is 737*737 mm, mmin size is 370*370 mm, thickness is 25-40 mm.
ET-F400 transport height is 860-940 mm, transport direction is left-right, right-left, left-left or right-right. Max transport speed is 1500mm/s programmable.
ET-F400 have two independent motorised printheads.
Stainless steel(Standard), plastic
Stencil Separation Speed
There are three ways to cleaning, dry, wet, vacuum.
Parameter of machine
Repeat Position Accuracy
<7s (Exclude Printing & Cleaning
AC:220±10%,50/60HZ 1Φ 3KW
1.We provide one year standard warranty.
2.We will sent our engineer to install and traning for freely.
3.We will provide The latest technical support
1.Is your software interface in English?
English interface and chinese interface are both available.
2.Which counties have your machine exported?
Our machine have expored more than 20 countries, such as India, Egypt, Korea, Turkey, Brazil, Vietnam, and so on.
3.Who is your client?
Such as FSL, ETI, KONKA, OPPLE, MLS are our client. In India, such as RK,Surya, skyquad are our client.
We believe that our unique products will help you to occupy more markets.
Add: 44th.Building,5th.Cuigang Industrial Area, Fuyong, Baoan District, Shenzhen,China