The details of automatic printer machine
Model | ET-F1500 | |
Item | ||
Screen Frames | Min Size | 1100X300mm |
Max Size | 1800X750mm | |
Thickness | 25~40mm | |
PCB Min Size | 80X50mm | |
PCB Max Size | 1500X350mm | |
PCB Thickness | 0.4~6mm | |
PCB Warpage | <1% | |
Transport Height | 900±40mm | |
Transport Direction | Left-Right;Right-Left;Left-Left;Right-Right | |
Transport Speed | Max 1500mm/S Programmable | |
Board Location | Support System | Magnetic Pin/Up-down table adjusted/supportblock |
Clamping System | 弹性侧夹/ Z向压片 | |
Squeegee Speed | 6~200mm/sec | |
Squeegee Pressure | 0~15Kg | |
Squeegee Angle | 60°/55°/45° | |
Squeegee Type | Stainless steel(Standard), plastic | |
Stencil Separation Speed | 0.1~20mm/sec Programmable | |
Cleaning System | Dry、Wet、Vacuum (Programmable) | |
Table Adjustment ranges | X:±10mm;Y:±10mm;θ:±2° | |
Machine | ||
Repeat Position Accuracy | ±0.015mm | |
Printing Accuracy | ±0.03mm | |
| <12s (Exclude Printing & Cleaning) | |
Product Changeover |
| |
| 4.5~6Kg/cm2 | |
Power Input | AC:220±10%,50/60HZ 1Φ 3KW | |
Control Method | PC Control | |
Machine Dimensions | 2500(L)X1200(W)X1500(H)mm | |
Machine Weight | Approx:1800Kg |
The featurers of automatic printer machine
1: The design of the solder paste printing machine is more intelligent and simple, and the previous complicated operation procedures are eliminated, and one button operation is possible. The speed can also be adjusted freely. You can think fast and fast, and slow down slowly. At the same time, the angle of the scraper can be adjusted at will, so that the all-round experience makes you more convenient to operate!
2: There is a good screensaver design. This avoids the use of screen damage that has been used for too long. This function can also adjust the usage time by itself, which improves the use time of the touch screen to the greatest extent;
3: Through the internal system adjustment, the form of unidirectional printing and two-way printing can be adjusted. At the same time, it can also adjust a number of printing forms, thus avoiding the single printing form, thus catering to the needs of a variety of printing modes, and can cope with each printing demand. The solder paste printing machine fully reflects the business from this point. Ability;
4: The most difficult thing in printing is to adjust the correct position. The solder paste printer passes the design of its blade holder. It can be adjusted before and after, so that it can be adjusted according to the needs in printing, and it can be better selected to the position of printing itself;
5: A good output system is used to allow access to the work area for adjustment and a complete system. Through such a system to adjust each link of the work, it is more convenient to ensure the normal progress of each work, so that each progress can be placed in the same place;
6: The solder paste printing machine has intelligent characteristics, can automatically count, and can record the quantity of production by itself, so that the production efficiency can be calculated, and the task of assigning work according to the record can also be performed;
7: The use of relatively high-tech technology, the introduction of Taiwan's technology. The inside of the scraper is driven by the guide rail and the motor to ensure the accuracy is ensured during the printing process. To know that the accuracy is not guaranteed, the success rate of the printing can be imagined.
Let’s light up your business
Contact information