0.6 m double rail conveyor
Do not install the machine in dusty, oil mist, conductive dust, corrosive gas, flammable gas, humidity, shock vibration, high temperature and outdoor environment use.
Working group: This is mainly done by professional installation personnel.
Please check whether the power supply meets the requirements after the power is switched on, whether the power switch is normal or not.
After power on, check the emergency stop switch and whether the protection device is normal.
The movement part is mainly responsible for the constant speed motor and cylinder, each part of the position detection by the stroke switch or eye induction.
Do not make the cylinder running too fast, and make it smooth and smooth.
The position of each sensor needs to be well adjusted.
Steel frame structure, rail length
Width adjustment range
7MM flat belt conveyor
Adjustable from 0.5 to 9 m/min
Set of stepper motor
Industrial control panel
Single(left→right or right→left)
One section of control, two Sensors
Set of electric control box
Every day, people all over the globe develop new ideas – ideas that can improve our lives and our world.
Helping to turn these ideas into real products is what we do and what drives us. To accomplish this, we are constantly advancing the limits of feasibility and efficiency by developing innovative solutions for the complete electronics production chain and the SMT placement process . ETON is dedicated to making quality products that help our clients operate more efficiently and effectively. ETON is guided by the principles of fairness to our suppliers, associates, clients and employees, and helping them achieve to the best of their potential.
A..Transport belt not moving: check if the belt is jammed or too loose.
B. Belt drop: check whether the belt pulley rotates flexibly and whether the screws are tightened.
C. The transmission motor does not work:
1. Check whether the power is normal and whether the indicator light is on.
2. Whether it is in test test state, if so, please test test switch or touch the left photoelectric switch.