1.2 M Conveyor
Steel frame structure, rail length
Width adjustment range
7MM flat belt conveyor
Adjustable from 0.5 to 9 m/min
Set of stepper motor
Industrial control panel
Single(left→right or right→left)
One section of control, two Sensors
Set of electric control box
ShenZhen ETON Automation Equipment Co.,LTD.Expert in making customized high quality SMT LED Pick and Place Machine, SMT LED Reflow Oven, SMT LED Stencil Printer, SMT Production Line, SMT LED Machines with more than 10 years experience!
Our goal is to provide customers with the best service possible and to produce excellent quality products that will meet or exceed your expectations.
Points for attention
1. Adjust the machine to horizontal state before use
2. Check whether the power supply conforms to the specification of the transmitter before starting
3. If the power supply is unstable, a power regulator must be installed.
4. The machine must be safely grounded, and the ground wire must be properly fixed in the fuselage.
5. In order to ensure the normal operation of the machine, do not download or change the controller and touch screen program.
6. If the machine is not in use for a long time, the power should be cut off.
According to customer requirements
1, Modular design
2, Iron square tube framework, powder coating on surface
3, Ergonmic design table for parts place and arm rest
4, standard SMEMA
5, Variable speed control
6, Width adjustbale
Check whether the conveyor belt is too loose and keep the conveyor belt clean.
Keep the width to adjust the cleaning of the optical axis and the screw rod.