Rugged Steel Design SMT Conveyor for Transport PCB

Rugged Steel Design SMT Conveyor for Transport PCB

0.6 M Conveyor Level position: All cup foot adjustment must be balanced and forced at the same time to avoid vibration during mechanical operation. Power supply requirements: Input voltage please check whether it meets the requirements, the capacity of more than 200 watts of fixed power supply...
Chat Now

Product Details

0.6 M Conveyor

bbbbbbb 

 

Level position:

All cup foot adjustment must be balanced and forced at the same time to avoid vibration during mechanical operation.

Power supply requirements:

Input voltage please check whether it meets the requirements, the capacity of more than 200 watts of fixed power supply switch supply device must be equipped with leakage protection.

If the power supply is unstable, a power regulator must be installed.

Machinery must be safely grounded.

The ground wire must be well fixed in the fuselage section.

 

Technical parameter:

Steel frame structure, rail length

L=600

Width adjustment range

50390

Transmission height

920±20

Transmission

7MM flat belt conveyor

Speed

Adjustable from 0.5 to 9 m/min

Motor

Set of stepper motor

Control

Industrial control panel

Transmission Direction

Single(left→right or right→left)

One section of control, two Sensors

Set of electric control box

 

Attention

1. Ensure that there is no foreign matter in the transportation part, belt, belt wheel and guide rail, and ensure smooth and smooth transportation.

2. Regularly oil the transmission part and the rack or width adjusting screw rod, and the oil shall be executed in the stopped state.In case of power failure, please immediately turn off the main power switch of the equipment.

Hot Tags: Rugged Steel Design SMT Conveyor for Transport PCB, China, Rugged Steel Design SMT Conveyor for Transport PCBupplierRugged Steel Design SMT Conveyor for Transport PCB, manufacturerRugged Steel Design SMT Conveyor for Transport PCB, factory, price

Inquiry

You Might Also Like