PCB Inspection Conveyor Flat Belt Conveyor PCB Conveyor

PCB Inspection Conveyor Flat Belt Conveyor PCB Conveyor

1.2M dual-track and segment conveyor(with detection) Installation: Horizontal position: all cup foot adjustments must be balanced and stressed simultaneously to avoid vibration during mechanical operation. Power supply requirements: please check whether the input voltage meets the requirements,...
Chat Now

Product Details

1.2M dual-track and segment conveyor(with detection)

1

Installation:

Horizontal position: all cup foot adjustments must be balanced and stressed simultaneously to avoid vibration during mechanical operation.

Power supply requirements: please check whether the input voltage meets the requirements, and the fixed power switch supply device with capacity above 200 watts must be equipped with leakage protection.If the power supply is unstable, a power regulator must be installed.

Machinery must be safely grounded.The ground wire must be properly secured to the fuselage.


Technical parameter:

Steel frame structure

Special aluminum profile rail (bilateral rail)

Width adjustment range

50280mm

Transmission height

920±30 mm

Transmission

7MM green flat belt conveyor

Motor

Set of stepper motor

Transmission Direction

Single(left→right or right→left)

IO interface for inlet and outlet board

Set of electric control box

Double work table, length 400mm, double light stand, double SOP stand, bilateral main frame

6 sets of Sensors (one Sensor installed at the beginning and the middle)

 

 

Company profile :

ShenZhen ETON Automation Equipment Co.,LTD.is a leading manufacturer of automatic SMT machine.In 2011,set up ShenZhen Eton Automation Equipment Co.,Ltd.In 2011,HT-12 series began selling.In 2011,HT-E3 was complete research and development (Eton 3 generation machine).


Basic troubleshooting:

A..Transport belt not moving: check if the belt is jammed or too loose.

B. Belt drop: check whether the belt pulley rotates flexibly and whether the screws are tightened.

C. The transmission motor does not work:

1. Check whether the power is normal and whether the indicator light is on.

2. Whether it is in test test state, if so, please test test switch or touch the left photoelectric switch.


Our Service

1.Your inquiry about our products and price will be replied within 24 hours;

2. Well-trained and experienced staffs to answer all your enquires in fluent English;

3.Best products and price to offer;

4.Shortest time to delivery the products ;5.Strict QC before shipping the products;

6.With 1 year warranty !

7.Good packing!

Hot Tags: pcb inspection conveyor flat belt conveyor pcb conveyor, China, suppliers, manufacturers, factory, price

Inquiry

You Might Also Like