X series: 8 zones lead-free reflow oven ET-R8
full computer lead-free reflow soldering machine equipment
The reflow welding process of surface-mount plates is complicated, which can be divided into two types: single-side mount and double-side mount.
Single face pasted on
Pre-coating paste → patch (manual mounting and automatic mounting) → reflow welding → inspection and electrical testing.
Surface A pre-coating paste → patch (manual mounting and machine automatic mounting) → reflow soldering → surface B pre-coating paste → patch (manual mounting and machine automatic mounting) → reflow soldering → inspection and electrical testing.
Starting total power: 45KW, Normal: 8KW
Controlled temperature zones : up 8 heating Zones, down 8 heating zones, 2 cooling zone
Heating length: 3000MM
Temp. Accuracy: ±1℃
PCB Temp. Deviation: ±2℃
Heat up time: <25min
Mesh speed: 0-1.8M/MIN
Mesh height: 900±20mm
Mesh width: 480 mm
Mode of transport: Mesh belt
PCB Size: 50~350 mm, can be adjustable
Apply solder paste type: Lead-free solder/Ordinary solder;
Applicable components type: BGA,CSP etc. single/double sided;
Power protect: UPS;
Control Method: Full computer control;
Screw: Furnace electric screw
Full computer lead-free reflow soldering machine selection material table
High temperature motor
Control system PLC
UPS uninterruptible power supply
SSR contactless switch
Phase sequence protector
Imported nickel wire
Company profile :
ShenZhen ETON Automation Equipment Co.,LTD.is a leading manufacturer of automatic SMT machine.In 2011,set up ShenZhen Eton Automation Equipment Co.,Ltd.In 2011,HT-12 series began selling.In 2011,HT-E3 was complete research and development (Eton 3 generation machine).
Q: Are you a factory or trading company?
A: We are a leading manufacturer of automatic SMT machine with more than 10 years experience, committed to supplying our customer top quality and dedication to the constant improvements of quality, reliability, productivity and the competitiveness of our products and services.
Q: How to get a quotation?
A: Please send us an inquiry directly. We need to get specific details, such as material, size, color, thickness, quantity, etc.
Q: Can you do the production as customized?
A: Yes, we have a professional technique team, we could produce the machine depends on your requirements.
Q: What are your terms of payment?
A: We accept TT/LC, every payment term we can discuss.
Reflow maintenance system
Maintenance that we have to do after reflow soldering;Otherwise, it is difficult to maintain the service life of the equipment.
1. Daily inspection shall be conducted on all parts, with special attention to the transmission belt, which shall not be stuck or detached
2. When overhauling the machine, turn off the power to prevent electric shock or short circuit
3.The machine must be kept steady and not inclined or unstable
4.In the case of a stop to heating in an individual temperature zone, check that the corresponding fuse is remelted by remelting the paste pre-allocated to the PCB pad